Saudi Arabia's Ministry of Human Resources and Social Development, together with the Ministry of Municipalities and Housing, announced on 8 November 2026 that the Saudization rate for 94 technical engineering professions in the private sector will rise to 35%, effective 9 May 2027. The change reaches civil, electrical, mechanical and electronic engineering technicians plus surveying, maintenance and drafting roles, and it shapes how Chinese contractors in the kingdom staff site teams and whether Chinese staff on technician work visas can renew or move posts.
What does the 35% Saudization rate require?
The announcement is a joint decision by two ministries targeting a defined group of occupations, not a blanket increase in foreign-hiring limits across the economy. Under the SPA report, it covers private-sector establishments that employ five or more people in the targeted professions, with the ratio calculated at entity level and implementation mechanics set out in a procedural guide.
One caution: the announcement does not state the rate that applied before, nor does it publish per-profession quotas, penalties or transitional relief by company size. Those details are delegated to the guide on the ministry's website, which sets the occupation list, implementation mechanics, the calculation method and compliance rules. Reading the change as a single old rate being lifted to 35% is therefore imprecise; the safer reading is that this occupation group will carry a hard 35% entity-level ratio from May 2027.
Which jobs and employers are covered?
The named roles run from civil, electrical, mechanical and electronics technicians to surveyors, maintenance technicians and architectural drafters, all defined through the Saudi Standard Classification of Occupations. Note the level: technicians and drafters, not engineering or managerial posts in general, and the guide's list decides whether a specific role falls inside the 94.
The employer test matters just as much: private sector only, a target-profession headcount of at least five, and a ratio computed per legal entity rather than per project or department. Chinese groups running several projects in the kingdom through separate companies must first establish each entity's target-profession base, then plan recruitment and training, instead of estimating from site headcount.
Both ministries frame the step as part of the labour market strategy and Vision 2030, aimed at bringing more Saudi talent into specialised roles.
The decision applies to all private-sector establishments employing five or more workers in the targeted professions, with the rate calculated at the entity level in accordance with the procedural guide.
What are the key terms?
| Item | Requirement |
|---|---|
| Occupations covered | 94 professions, spanning electrical, mechanical, civil and electronics technicians, plus surveyors, maintenance technicians and drafters |
| Saudization rate | 35% |
| Employers covered | Private-sector establishments with five or more staff in the target professions |
| Level of calculation | Entity level |
| Effective date | 9 May 2027 |
| Support offered | Incentives for recruitment, training, qualification, hiring and retention, plus priority access to Saudization support programmes |
How much time is left?
Employers get roughly six months: the decision was announced on 8 November 2026 and applies from 9 May 2027. The ministry has already posted a procedural guide covering the occupation list, implementation mechanics, the calculation method and compliance rules, which in practice moves the questions of what counts, who counts and when counting happens into that document.
For individuals the chain is fairly direct. If a post sits inside the 94, the employer's share of foreign technicians is capped by the 35% ratio, and compliance pressure usually shows up first in how quickly new posts are approved and how fast Saudi technicians are added, and only later in the existing team. Whether renewals for current staff are slowed case by case is not addressed in the announcement; that depends on the guide and on inspection practice, so it should not be treated as settled.
For employers the issue is planning. Contractors handling large infrastructure, plant and MEP work often rely on dispatched technicians and run thin on locally hired ones. Where an entity's target-profession base is small — five to ten people, say — a 35% entity ratio means real additional Saudi technicians, and renaming posts or shifting job grades is a weak hedge as inspection rules tighten. Separating the technician tier from the engineering tier, keeping dispatch teams in engineering and project management, and running systematic local recruitment and training at technician level sits closer to what the policy intends.
- Question
Which employers and jobs does the 35% Saudization rate cover?
- AIAIG answersIt covers private-sector establishments that employ five or more workers in the 94 targeted technical engineering professions. According to the Saudi Press Agency announcement, the rate is calculated at entity level, and the guide's categories span civil, electrical, mechanical and electronics technician roles, plus survey, maintenance and drafting positions classified under the Saudi Standard Classification of Occupations. The procedural guide sets the definitive list.
- Question
When does the new Saudization rate take effect?
- AIAIG answersOn 9 May 2027. The decision was announced on 8 November 2026 by the Ministry of Human Resources and Social Development together with the Ministry of Municipalities and Housing, leaving employers about six months to review their headcount, recruit and train Saudi technicians, and work out how the rate applies to each legal entity.
- Question
Will Chinese technicians in Saudi Arabia lose their jobs immediately?
- AIAIG answersNo, and "losing jobs" is the wrong frame. The 35% rate binds employers from 9 May 2027, not individuals today; the near-term effects are more likely to appear in how quickly new technical posts are approved and how fast firms add Saudi technicians. Staff should check whether their role sits on the 94-profession list, how large their employer's target-profession headcount is, and then discuss post-2027 arrangements with the employer. Check the official notice and procedural guide for the binding detail.
AIAIG View
Firms with engineering work in Saudi Arabia should audit headcount now. Work backwards from 9 May 2027: count target-profession staff per legal entity, separate technicians from engineers and project managers, then size the gap the 35% rate implies. The smaller the base (five to ten staff), the harder natural turnover will close it, so recruitment and training need to start roughly six months ahead.
Do not treat "technician" as a interchangeable block of posts. The list covers civil, electrical, mechanical and electronic engineering technicians, surveying and mechanical maintenance technicians, and architectural drafters — roles that combine site experience with code and language continuity. A workable split keeps Saudi technicians in long-term site roles while dispatch teams retain commissioning, quality and interface coordination, with training and certification support drawn from the ministry's incentive programmes.
For individuals, check three things in order: is the role on the list, how large is the employer's base, and what happens to the post after 2027. If the role is covered and the entity's local ratio is clearly short, consider moving into an engineering or project-management track rather than waiting for an employer notice.
Read the procedural guide, not second-hand summaries. Penalties, inspection cadence, whether the rate is calculated per profession, and how renewals for existing staff are handled are absent from the announcement and live in the guide and later ministry notices. Claims that the rule bites immediately, or that staff will be cleared out overnight, should be checked against the original text.
This is general information and judgement, not legal or immigration advice; the official notice governs.
Sources
Last updated Nov 21, 2026
